Tec-team Metal Cutting Fluid Coolants Equipment Lubricants Gun Cleaner

COOLANT     CUTTING OIL



Manufactured under ISO 9002 Quality Standards and Field-Tested

Criteria for a Product
Teclon-50DieselVeg Oils
Soaps​
Solvents
Works on SuperpaveYesNoNoNoNo






Extra High TemperaturesYesYesNoNoNo






Slat Conveyor LubricantYesOldNoNoNo






Plates Out on MetalYesNoNoNoNo






Toxic or Health HazardNoYesNoNoYes






Corrosion ProtectionYesNoYesYesNo






VOC / Smog ContributorNoYes
YesYesYes






Biodegradable
Yes
No
Yes
Yes
Yes






Soften or Strip AsphaltNo
Yes
Yes
No
Yes






Competitive End CostLowest
N/A
No
No
No






Labor Saver





Yes
Yes
Part
No
No


HIGH TEMPERATURE SYNTHETIC LUBRICANT TECHNOLOGY

Teclon-50 is the performance bargain. Because Teclon-50 is so efficient you will also save in the costs of purchasing, shipping and drum handling. Engineered for all mix designs and the only one of its kind on the market, Teclon-50 will consistently provide lower cost in truck bed and slat conveyor lubrication.

This information obtained by survey from professionals engaged in a wide spectrum of the HMA Industry.

Tec-Team provides at cost a drum-mounted truckbed spray system. Instructions for set-up are provided with the sprayer system and also by phone at (800) 700-2530.


                                                                    Teclon-50                                               Soap


Dilution Ratio                             40:1                                                                       10:1

Tonnage per 55 gals                   30,000                                                                  5,000 to 7,000

Price per gal.                               $7.95 / 9.95                                                         $3.00 / 6.50

Cost to run 30,000                      $437.25 / 547.25                                                 $942.15 / 2,041.33

At best a drum of soap or other conventional release agent, can only yield enough release for 7,000 tons of asphalt because of high water content and low dilution rates. Dilution rates can be deceiving. It is a chemical impossibility for a soap release agent to work at all, at many of the claimed dilution ratios. The true measure of the economics of a release agent is "tons of asphalt per drum." 

Teclon-50 contains no water, it is 100% concentrate and can contain as much as 5 times more active chemical than soap. The reported average yield, from one 55-gallon drum of Teclon-50, is over 30,000 tons. When running polymer modified asphalt's, such as PG 76-22, you can expect an average of 20,000 tons per drum. If your operating an automatic spray system like the Tec-Matic, you can expect a yield of 40,000 tons per drum on PG grades and as much as 80,000 tons on conventional mix designs.

Comparative cost analysis, to determine the lowest end use cost, to release 30,000 tons of conventional hot mix. (with Hydro 340 dispenser)

OUR TECHNOLOGY IS NUMBER ONE

TECLON-50 Cost Comparison to Conventional Soap Release Agents

PRICE ISN'T COST

______________________________________________________________________________________

If your paying as little as $3.00 a gallon for a release agent, Teclon-50 can save you money.

One 55-Gallon Drum can Release Over 30,000 tons of Conventional Asphalt and 20,000 tons of Superpave Mix Designs. That's at least 4 times better than competitive products.

With an Automatic Spray system like the Tec-Matic from Tec-Team, one 55-Gallon Drum can yield as much as 80,000 tons of Conventional Asphalt and 50,000 tons of Superpave Mix Designs.

That's Megatons compared to competitive products Don't be fooled by BRAND X, if your paying as little as $3.00 a gallon for your release agent, TECLON-50 will save you money.

With over 700 Contractors, Cities and Counties across North America, South America and Europe

COMPARE

  • Works Better than Diesel Fuel on truck beds and slat conveyors

  • DOT ApprovedBiodegradable

  • Will Not Freeze

  • Safe for Workers

  • Proven to Work on All Superpave Mix Designs

  • An Unmatched 605/800 (F) Degree Distillation Range

  • Cannot be Cooked Off Metal & Rubber Surfaces by Asphalt Temperatures

  • Bonds and Plates out on Metal and Rubber Surfaces

  • Provides Corrosion Protection

  • Non-VOC (Volatile Organic Compound)

  • The Absolute Lowest End Cost in the Business

When your Superpave release agent isn't Teclon-50: You're Stuck!


Not just another obsolete synthetic solvent, vegetable oil or soap. TECLON-50 is a Thermal Resistant, Synthetic Lubricant based system specifically designed for trucks hauling PMA, OGFC, and all Performance Grade (PG) Binders.

Teclon-50